Disclaimer: I am a NETGEAR Ambassador and I received this product in exchange for my honest, unbiased opinion and review.
The Nighthawk X8 AC5300 Router is the newest Tri-band router from NETGEAR. It uses 802.11ac WiFi technology with one 2.4GHz and two 5 GHz Wi-Fi bands. It has combined wireless speeds up to 5.3Gbps. It has a dual core 1.4GHz processor, 128 MB Flash and 512 MB RAM memory. It has Quad Stream and Implicit & Explicit Beamforming for both 2.4 & 5GHz bands.
We reviewed the Nighthawk X6 last year, which was NETGEAR’s first Tri-Band router and were impressed with its performance, so I was interested to see how the X8 compares.
The Nighthawk X8 is very quick and easy to set up. With the included quick start guide it was up and running in no time. You basically connect the modem, power on the router, connect a computer or device and complete the setup using the free NETGEAR Genie app. The external antennae come already attached, no assembly required.
The X8 comes with a pre-assigned Wi-Fi network name, typically NETGEAR plus a number, and password, which are on a peelable label on the X8. There is an option to change the name and/or password if you wish. The X8 has a WPS button so it is very quick and easy to connect any device with a WPS button, for other devices you just enter the Wi-Fi name and password as usual.
Size and Form Factor
You do need to make sure you have a large space available for it as the X8 is huge! It measures 12.44″ x 10.39″ x 2.40″ (316 x 264 x 61 mm), which is even bigger than the X6. It has 4 external antennae, so it also needs a lot of headroom- with the antennae extended upright it is approximately 19cm/ 7 1/2″ tall. The top surface has a wavy black plastic grille which looks futuristic, but also has the practical effect of preventing you stacking anything on top of it, important to prevent overheating.
The X8 has a total of 8 antennae- 4 internal plus 4 external. The external antennae are movable in many directions. NETGEAR recommends setting them up with the 2 central ones upright and the side ones at 45°, but you can change this if you wish. The external antennas are active antennae, which is a new feature. This means that instead of the WiFi amplifiers being on the router’s motherboard (the standard location) they are on top of the antennae so they can amplify the signal in the antenna itself. This is designed to improve connection to mobile devices such as smartphones and tablets. The external antennae have blue LEDs to show when they are active, but you can switch the LEDs off if you find them distracting.
USB Ports and Secure Storage
The X8 has 2 USB ports- one is USB 2.0, the other 3.0. I like having two USB ports available, but I’m not sure why they didn’t make them both 3.0.
If you attach an external hard drive to a USB port you can use the free NETGEAR ReadyCLOUD mobile app or web portal to access the drive’s content from anywhere. This is a very simple way to create your own personal cloud.
The X8 has six Gigabit Ethernet LAN ports, and one WAN. This means you can connect up to six wired devices for maximum performance. There is also the option to combine two of the six to double the connection speed for a Network Attached Storage device to allow 4K HD streaming or multiple fast WiFi backups.
The X8 has a number of features designed to maximize Wifi speeds and performance for gaming and video streaming.
Like the X6 this is a Tri-band router, it has one 2.4 GHz and two 5GHz Bands. 2.4GHz is an old Wi-Fi standard, it is slow and prone to interference, but is necessary to allow older devices to connect to your network. 5.0 GHz is the newer standard, and gives faster performance with less interference, but if you have a lot of devices on the 5.0 GHz it can slow down the connection and affect performance. Having two 5.0 GHz bands helps to prevent slowdowns from lots of devices using it at once.
The X8 delivers a combined wireless speed of up to 5.3Gbp- 1000Mbps for the 2.4GHz band, plus 2166 Mbps for each of the two 5.0 GHz bands.
It has Quad Streaming to deliver up to four data streams per WiFi band, making 12 in total. Smart Connect selects the fastest WiFi band for each device and Dynamic QoS prioritizes traffic by application and device.
When we installed the X6 we saw a big leap in performance compared to our previous router, an Apple Airport Express, and we have seen a further improvement with the X8 vs the X6. We have a challenging home for WiFi – it has an unusual layout over 3 staggered floors and poor incoming signal because we live a long way from the DSL hub. With the X6 we found it optimized our signal near the router but for the far flung parts of the house we still needed to use a booster such as the NETGEAR Nighthawk AC1900 WiFi Range Extender Model EX7000 to get a useable signal.
With the X8 we have a slightly stronger signal near the router- but the improvement is marginal. Where we have seen most gains is further from the router – we now get a useable signal throughout the entire house without having to use a WiFi booster- which is a huge improvement! In the master bedroom (unless I used a signal booster) we barely had a signal at all and couldn’t even read email reliably, with the X8 I can surf the web, download apps, do email and even watch Youtube videos. The X8 has done a great job of #eliminating deadspots.
We cut the cable almost two years ago and only have TV via DVD and streaming services such as Netflix and Amazon Prime, so good quality video streaming is very important to us. Unfortunately we have a weak incoming internet connection which can cause hangups in our streaming. The performance with the X6 was much better than with the Airport Express and has improved again with the X8. Our family has a lot of connected devices including multiple iPads, Smartphones, tablets, Smart TV and Xbox. In the past when the Smart TV is streaming video and multiple family members are streaming to different devices at the same time we have had some connectivity issues, but I have not seen this happen with X8.
Both the X6 and X8 have the option to set up a guest network to allow visiting family and friends to access Wi-Fi without sharing your main network password.
Like the X6, the X8 has the option to enable parental controls. This lets you choose from different levels of protection against things such as phishing scams, pornography, illegal activity, adult-related sites and even video sharing sites and social media. You can customize different setting for different times of the day.
The X8 has WiFi Protected Access® (WPA/WPA2—PSK), Double firewall protection (SPI and NAT) and Denial-of-service (DoS) attack prevention.
The X8 offers great performance with 3 Wifi Bands, Quad Stream, Dynamic QoS and Smart Connectivity. This gives it up to 12 data streams that are actively managed to give the best connection for each device. Its active antennae help to improve the connection for mobile devices such as smartphones and tablets.
I have been very impressed with the NETGEAR Nighthawk X8 AC5300Tri-Band WiFi Router and found it to perform even better than the X6. The main areas that we saw improvement in were the performance when multiple devices are connected at once, and a noticeable improvement in the WiFi range.
The X6 and X8 are both great routers, for many homes the X6 is a great choice. However if you have a large or challenging home, heavy demand for high speed internet for gaming or video streaming or large numbers of connected devices the X8 may be a better choice.
Price and Availability
The NETGEAR Nighthawk X8 AC5300Tri-Band WiFi Router has an RRP of $399.99 and is available from Amazon and other retailers.
Mary is originally from England but now lives in California with her husband, dog, cat and three children. Mary and her family love Apple products and own an iPad2, iPad3, iPad Mini, iTouch, iPhone5 and several MacBook Pros. They also love cub scouts, skiing, camping and hiking. The family iPads are also used for therapy for their daughters Apraxia (speech disorder).